POWER LED NUMBER
Illuminated license plates (for passenger cars and light vehicles)
Illuminated number plate lighting equipment
Approved by the Ministry of Land, Infrastructure, Transport and Tourism (Kokujijo No. 153/Kokujigi No. 187)
The letters shine brightly, giving you the ultimate dress-up effect!
- Compatible with vehicle inspection
- Illuminated number plate lighting equipment
- 3 year warranty
- For passenger cars
- For light vehicles
- For 24V vehicles
Medium and small size - long life
30,000 hours
Illuminated license plates for passenger cars
Uses ultra-high brightness LEDs and surface-emitting methacrylic resin panels
RG uses a newly developed surface-emitting methacrylic resin plate in its lighting fixtures, which is designed to emit strong, bright light throughout the entire character.
Long life/power saving/waterproof and dustproof/noiseless design
・The ultra-high brightness LED used as the light source is designed with an optimal LED specification and has a long life of 30,000 hours (half-life of brightness).
・Power consumption is 1.2W, far less than incandescent bulbs, while providing an average illuminance of 1,700 lux. Uniformity of 1.4 provides excellent light emission characteristics. *Uniformity = unit of light variation. "1" is no variation. 1.4 is a state where there is very little light variation across the entire number plate.
-Waterproof and dustproof design that keeps out water and dust.
- Equipped with a high-performance constant current circuit. High-load design that can handle a maximum instantaneous voltage of 28V (for 12V)/36V (for 24V). *Continuous high voltage application is not applicable.
- Noise-suppression design that reduces the generation of radio noise and does not adversely affect in-vehicle equipment such as radios and sonar.
・We provide a 3-year warranty in accordance with our warranty policy.
Achieves a thickness of 9 mm
A newly developed surface-emitting methacrylic resin plate is used. By combining it with an ultra-high brightness LED, an ultra-thin 9mm plate is achieved. It can be installed on any vehicle.
*When used in conjunction with the included dedicated plated bezel, the thickness is 13 mm.
Structure of illuminated number plates
In addition to this product (lighting equipment), you will need to apply for and have an illuminated license plate issued at the Land Transport Bureau counter.
Illuminated license plate for light vehicles
An industry first! LED light with outstanding visibility thanks to the use of special gel
RG uses a model equipped with a special gel for light vehicles (P803).
Light vehicle license plates are designed so that the edges of the black letters glow, and a special gel guides the light to the inside edge of the number plate, making it uniformly visible from the front and at an angle, and giving it a powerful glow.
Long life/power saving/waterproof and dustproof/noiseless design
・The ultra-high brightness LED used as the light source is designed with an optimal LED specification and has a long life of 30,000 hours (half-life of brightness).
・Power consumption is 1.2W, far less than incandescent bulbs, while providing an average illuminance of 1,700 lux. Uniformity of 1.4 provides excellent light emission characteristics. *Uniformity = unit of light variation. "1" is no variation. 1.4 is a state where there is very little light variation across the entire number plate.
-Waterproof and dustproof design that keeps out water and dust.
- Equipped with a high-performance constant current circuit. High-load design that can handle a maximum instantaneous voltage of 28V. *Continuous high voltage application is not applicable.
- Noise-suppression design that reduces the generation of radio noise and does not adversely affect in-vehicle equipment such as radios and sonar.
・We provide a 3-year warranty in accordance with our warranty policy.
RGH-P803 Special gel model
Light vehicle license plates are designed with a glowing black border around the letters, and the P803 has a special diffusion gel sealed between the lighting fixture and the license plate.
Achieves a thickness of just 9mm (P803)
When used in combination with ultra-high brightness LEDs, it achieves an ultra-thin 9mm thickness. It can be installed on any vehicle. *When used in combination with the included dedicated plated bezel, the thickness is 13mm.
RGH-P804 Light model
A reasonable "light model" is available exclusively for light vehicles.
①Lightweight! Product weight is about 255g. Lightweight yet highly durable.
②The thickness of the LED lighting fixture is 13 mm. *17 mm when used with the included painted silver frame.
*Energy-saving model with power consumption of 1.7W.
*This model does not have the special gel that guides light to the edges.
Structure of illuminated number plates
In addition to this product (lighting equipment), you will need to apply for and have an illuminated license plate issued at the Land Transport Bureau counter.
P803 (special gel specification) light source
LED + special gel. Uses 15 high brightness LEDs.
A special gel penetrates into the three-dimensional parts of the letters on the back of the license plate and guides light.
P804 (light model) light source
Uses 9 high brightness LEDs.
The light model is equipped with sufficient rear light source.
Product lineup
[Product number/specifications]
*Product number/quantity is 1 piece. For one vehicle (front and rear), 2 pieces are required.
*The power consumption is listed for one sheet. Please be careful when purchasing.
| Product number | frame | Voltage | power consumption | List price (tax included) | JAN code 49963270 |
|---|---|---|---|---|---|
| RGH-P801 | With plated frame | For 12V vehicles | 1.2W | 13,530 yen | 89254 |
| RGH-P805 | No plated frame | 11,550 yen | 92384 | ||
| RGH-P802 | With plated frame | For 24V vehicles | 13,530 yen | 89261 | |
| RGH-P806 | No plated frame | 11,550 yen | 92391 | ||
| RGH-P803 | With plated frame | For light vehicles | 1.2W | 14,630 yen | 89278 |
| RGH-P804 | With silver frame | 1.7W | 9,350 yen | 92377 | |
| RGH-P807 | P801/P802 Attached Plated Frame | – | 2,200 yen | 93589 | |