[NEW] POWER LED FOG TWIN COLOR
You can instantly change the color with the fog switch on/off!
Switch between white and yellow light depending on weather and road conditions
6000K (white) for a stylish look and 2800K (yellow) for weather resistance
The ultimate fog color switching product that covers all expected operations!
- Compatible with vehicle inspection
- For fog bulbs only
- 3 year warranty
- Color temperature
6000K⇔2800K switchable - Genuine valve shape
Built-in driver - Fanless
- 12V only
- Brightness
3600 lumens
Easy and safe switching mechanism
Easy color switching and memory function
[Easy color switching]
When the genuine fog lamp switch is turned on, the color will change if you turn it off and on once (only within 3 seconds).
[Built-in memory function]
It remembers the color you last used. You can use your favorite color the next time you turn it on. (This will be maintained even if you remove the battery.)
[Perfect program settings]
The program settings prevent color differences between the left and right lights from occurring when using auto lights as well. A reset function is also built in just in case.
* By turning the lights on and off twice, the left and right lights will be uniformly white (only within 3 seconds).
How to switch and reset
Brightness and light distribution
Achieves a total luminous flux of 3600lm (lumens), surpassing halogen bulbs. Both white and yellow light are equally bright. *Brightness is for two bulbs (one bulb).
Achieves a light distribution pattern that far exceeds that of genuine halogen bulbs. The optimal layout of the LED chips is pursued to strongly illuminate the road surface from the front to the back, providing safety to the driver. It firmly suppresses unnecessary light distribution (glare light) to the upper part, and irradiates strong, uniform light up, down, left and right below the horizontal line.
Wall illumination comparison
It suppresses glare (unnecessary light distribution) above the horizontal line and emits strong, uniform light distribution up, down, left and right. *Because the yellow light is slightly higher, it is necessary to adjust the light axis when the yellow light is turned on during installation.
Road surface illumination comparison
It provides stronger illumination from the front to the back and slightly further away than genuine halogen bulbs.
Achieving both practicality and dressing up - Differences in light distribution
The white light has a "wide illumination" that compensates for the difficult-to-illuminate range in front of the vehicle with genuine headlamps.
The yellow light shines slightly further back to make it easier to see and distinguish poorly visible wet roads, and assists the "driving visibility zone."
*The irradiation distance shown in the illustration is the reference irradiation distance when the fog lamp height is 350 mm. It varies depending on the lamp height and angle shape.
*When installing, please adjust the light axis based on the yellow light distribution. If the light axis is set based on the white light distribution, the light distribution will be high when switched to yellow.
Almost the same size as genuine halogen bulbs, easy to install
Designed to be almost the same size as the genuine halogen bulb. The light emitting part is also designed to be at the same height (center of light) for halogen and LED. Realized a very beautiful cut line and light distribution.
It is easy to install and can be used in a variety of vehicles without compromising temperature control or brightness when the product is turned on.
*Various vehicle models are applicable.
Various features
Beam angle adjustment
The irradiation angle can be freely adjusted to match the lamp of each vehicle. By loosening the set screw with the included L-shaped wrench, you can adjust it by rotating the LED bulb body to match the reflector line of the lamp.
*Due to the light distribution of the PSX26W, there is no rotation mechanism and no L-shaped wrench included.
Highly waterproof
Passed the JIS standard D0203 fountain test, the highest level S2 class.
Ultra-low noise design, CISPR25 compliant
Low noise design at the same level as factory-installed products. Passes CISPR25 Class 4, the Ministry of Internal Affairs and Communications noise standard.
Designed for Japanese vehicles/Compatible with hybrids, EVs, and idling stop vehicles
The high-performance constant current circuit is designed to handle high voltage loads and low voltages when the engine is stopped. It can handle low voltages that are common in idling stop vehicles and ultra-high voltages that occur momentarily in EVs.
Electrode-free design
This product has a built-in polarity-free circuit. It can be easily installed without the need to test the positive and negative terminals on the vehicle side.
Long life design
Precision design that takes into account the usage environment has achieved a long life of more than 10,000 hours.
Product lineup
Product case image
Product composition image
Component parts
・2 LED fog bulbs
- Light distribution adjustment wrench x 1 *Included with P561 only.
Lineup
[Product number/specifications]
*The product contains 2 valves. *Brightness is the value for a total of 2 lights on the left and right sides.
*Power consumption is for one light on each side. *This model is for 12V vehicles only. It can be used for commercial vehicles, but the warranty is 2 years.
| Product number | Shape | Color | Brightness | Rating | List price (tax included) | JAN code 49963271 |
|---|---|---|---|---|---|---|
| RGH-P561 | 11/16/1998 | 6000K 2800K (Kelvin) switching | 3600lm | 12V 16W | 14,080 yen | 15120 |
| RGH-P562 | PSX26W | 15137 |