POWER LED HEAD BULB COMPACT STAR for HEAD
The highest level of brightness in a small LED head bulb!
compact star four head
Upgrade to an LED bulb just like replacing a halogen bulb!
Pursuing maximum cooling efficiency with rear fan type!
- Compatible with vehicle inspection
- For head valve only
- 2 year warranty
- Color temperature 6000K
- Built-in driver
- rear fan
- High luminous flux maintenance rate
- brightness single
4400 lumens - Brightness H4
Hi4000/Lo3400
lumen
Easy to install! Integrated driver/equal size to halogen bulb!
Ultra-compact design with dimensions equal to or smaller than halogen bulbs equipped with connectors. Since it has an integrated driver structure, you can easily upgrade to LED as if you were replacing a halogen bulb.
Bubble size comparison
Component parts
Product box size: H110.5✕W105.5✕D60
High beam indicator canceller for H4 (sold separately)
Some Toyota/Daihatsu vehicles require an option (P795) to turn on the indicator lamp. For details, please refer to the vehicle model application table.
*Use 1 piece per car and attach it to either the left or right side.
Rear fan type (maximum cooling efficiency)
The LED light emitting part lights up while generating a considerable amount of heat. If you do not pay special attention to heat dissipation with small bulbs, the amount of light will decrease due to heat sag. Compact Star Four Head has an optimal structure = rear fan layout aiming for maximum cooling in miniaturization!
●Emphasis on heat dissipation, which is the weak point of small valves.
● Immediately conducts heat from the light emitting part to the rear heat sink part.
●The rear fan layout boasts maximum cooling efficiency to suppress the decrease in light intensity due to heat sag.
●Quiet fan suppresses abnormal noise and has low noise specifications. (based on CISPR25 standards)
Highest brightness (luminous flux) maintenance rate for a small bulb
The Compact Star Four Head is designed to maintain the brightness at initial lighting even though it is a small bulb. Based on the rear fan layout for maximum cooling efficiency, the high heat dissipation mechanism maintains over 90% of the initial brightness even when stable (after 30 minutes).
*LED bulbs whose light intensity decreases significantly after initial lighting will significantly shorten the lifespan of electronic components.
Checking the brightness maintenance rate with a luminosity tester
Many small LED head bulbs made by other companies provide only momentary brightness and tend not to maintain the brightness. With the Compact Star Four Head, we focused on ``brightness maintenance rate using a luminous intensity tester,'' ``absolute brightness using a total luminous flux measuring device,'' and ``visibility (brightness) when installed and lit on an actual vehicle.'' It is a specification.
Please check the video comparing the brightness change with other companies' products using a light intensity tester after 1 minute to 10 minutes of lighting.
Change in brightness compared to other companies' products
LED headlight comparison test video
Click on the icon above to check the change in brightness of each company using a luminosity tester. This is an easy-to-understand reference video that compares RG products and other companies' products on the lighting time axis.
Easy to install! You can work as if you were replacing a halogen bulb!
- H4 requires the flange to be removed once, but since it is very compact and has an integrated driver, it can be installed with a coupler on without worrying about the rear size.
●The single type can be equipped with a coupler on using almost the same process as a halogen bulb.
Easy-to-see 6000K (white light) approximately 1.7 times brighter!
Approximately 1.7 times brighter and more visible than normal halogen bulbs. The best brightness for a small LED head bulb!
Single bulb 4400 lumens *Value for 2 bulbs for 1 car.
H4 (Hi/Lo) 4000/3400 lumens *Value for 2 bulbs for 1 unit.
It illuminates areas that cannot be illuminated by halogen bulbs to make it easier for drivers to see, reducing stress and improving safety in difficult-to-see driving scenes.
Product lineup
[Product number/specifications]
*The product contains 2 valves. *Brightness is the value for a total of 2 lights on the left and right sides.
*Power consumption is based on 1 light on each side. *This is a model for 12V vehicles only. Not applicable to commercial vehicles. (Limited to private cars)
| Product number | Shape | Color | Brightness | Rating | List price (tax included) | JAN code 49963271 |
|---|---|---|---|---|---|---|
| RGH-P791 | H9/11 | 6000K (Kelvin) | 4400lm | 12V 24W | 9,020 yen | 02892 |
| RGH-P792 | HB3/4 | 02908 | ||||
| RGH-P793 | HIR2 | 02915 | ||||
| RGH-P794 *1 | H4 | Hi4000/ Lo3400lm | 12V Hi24/ Lo22W | 02922 | ||
| RGH-P795 | high beam indicator adapter | For 12V vehicles only | 3,850 yen | 03165 | ||
*1 RGH-P794 (for H4) is a discontinued product and is available only while supplies last.