[NEW] POWER LED HEAD BULB Genuine HID → LED
10,000 lumens of brightness that exceeds HID!
純正バルブ形状モデルで簡単交換!
Achieves approximately 1.6 times the brightness compared to genuine HID. *Right and left total 10,000 lumens.
純正HIDバルブと同形状/ドライバー内蔵タイプ。
Excellent heat dissipation design maintains initial brightness.
- Compatible with vehicle inspection
- For head valve only
- 2 year warranty
- Color temperature 6000K
- Genuine valve shape
- Built-in fan
- High luminous flux maintenance rate
- Built-in driver
- Brightness
10000 lumens
Easy to install! Just replace the original HID bulb with an LED head bulb.
Made to the same dimensions as genuine HID bulbs. Work can be done just like replacing a bulb.
D2S, D2R, D4S, and D4R are available in 4 part numbers each.
*Please note that there are some vehicles in which this light cannot be installed due to compatibility issues with some ballasts or the internal dimensions of the light fixture, so please be sure to refer to the compatibility table for vehicle compatibility.
Just replace the original HID bulb.
The installation method is to simply replace the original HID bulb. Since it has the same shape as the original HID bulb, it can be replaced by following the vehicle maintenance manual.
*Although the shape is the same as the genuine HID bulb, there are some vehicles where the insertion port is too narrow to insert, and some vehicles have poor compatibility with the ballast and poor lighting. Please be sure to refer to the vehicle compatibility chart.
バルブ寸法比較
純正HIDバルブとほぼ同形状のコンパクト設計!
しっかりと配光を出す為、発光点位置(LCL)をHIDと同じ寸法で実現。ドライバーレス(内蔵)の為、取付し易い設計構造となっています。
Equipped with the strongest cooling mechanism! Copper board + heat pipe + heat sink + built-in cooling fan
Brightness is 5000lm (lumens) on one side with zero attenuation from initial lighting.
The LED light emitting part lights up while generating a considerable amount of heat. In order to immediately transfer the heat generated by the light emitting part to the rear, the triple layer structure of a copper substrate with excellent thermal conductivity, a heat pipe with excellent heat transfer, and an ultra-cooling heat sink fan achieves the strongest temperature control! Although it has a large amount of light, there is no heat sag (attenuation) from the initial lighting!
★"Momentary point" LED stabilizes to MAX brightness in about 0.5 seconds! *HID takes 20 seconds or more for the brightness and color to stabilize. (See graph of brightness and lighting time)
10,000lm (lumens) brighter than genuine HID, 1.6 times brighter
Approximately 1.6 times the brightness and visibility compared to normal HID bulbs.
Genuine HID replacement LED head bulb with the highest brightness! 10000 lumens! *Value for 2 pieces for 1 unit.
The already bright HID bulb has been commercialized with significantly improved visibility and practicality. By designing it specifically for each D2S/D2R/D4S/D4R bulb, we have pursued outstanding light distribution performance.
Even a light intensity tester makes a difference.
D2S/D2R/D4S/D4Rとバルブ形状毎に専用設計とする事で、精度の高い配光にて車検対応と照射面の大幅な明るさアップを実現しました。
For cars that are difficult to see or dark even with HID, you can expect a significant increase in the brightness tester.
*Not compatible with all vehicles. Please be sure to refer to the compatibility table for each vehicle type.
Product lineup
[Product number/specifications]
*The product contains 2 valves. *Brightness is the value for a total of 2 lights on the left and right sides.
※消費電力は片側1灯の片側1灯の表記です。※12V/24V車兼用モデルです。24V車及び商用車への装着は保証期間1年となります。(詳細は取説・保証書を参照)
*Case size H110.5 x W105.5 x D60.0 (mm)
Product number | Shape | Color | Brightness | Rating | List price (tax included) | JAN code 49963271 |
---|---|---|---|---|---|---|
RGH-P912 | D2S | 6000K (Kelvin) | 10000 lumen | 12V/24V 40W | 19,250 yen | 15144 |
RGH-P913 | D2R | 15151 | ||||
RGH-P914 | D4S | 15168 | ||||
RGH-P915 | D4R | 15175 |