[NEW] POWER LED HEAD&FOG BULB PREMIUM MODEL2
Illumination performance that pursues true visibility
Wide and bright from front to back
Easily upgrade to LED with the same shape as a halogen bulb!
The level of brightness achieves the highest standard in the industry.
Ultra-tough and durable design that can also be used in commercial vehicles!
- Compatible with vehicle inspection
- Combined use as head and fog
- 3 year warranty
- Color temperature 6000K
※P971/P973 - Color temperature 2800K
※P972 - Halogen same shape
- Built-in driver
- Built-in fan
+Copper substrate and heat pipe - High luminous flux maintenance rate
- brightness single
6000 Lumens - Brightness H4
Hi5800/Lo5000
lumen - High Beam
Indicator Canceller
Built-in (H4) - single
H11 type/HB/HIR2
Dual-purpose flange included
Maximum brightness: 6000 lumens *Value for two single bulbs
H4 Hi: 5800lm/5000lm *Values for two bulbs
Bright low beam with wide light distribution from front to back
By using a wide LED chip, it brightly covers areas that cannot be illuminated by a normal bulb.
The illumination has been significantly improved in areas that drivers really want to see while driving: in front, to the left, right and in the center.
High beam with unique "high and low simultaneous lighting function" [perfect light distribution] *Feature only available for H4 type
The low beam also lights up when the high beam is turned on, brightening up the area just before it gets dark when the high beam is turned on with a normal bulb.
We have achieved perfect light distribution that ensures easy forward visibility from front to back.
*The two light-emitting parts on the product body will light up simultaneously when the high beam is on.
Compatible with new vehicle inspection standards (low beam vehicle inspection)
A newly designed product with improved applicability for low beam vehicle inspections.
Optimize the cut-off line angle upward to the left and the distance to the optical axis measurement point. Due to the optimization of light collection efficiency, some vehicles have an increase of approximately 4.5 times or more compared to genuine halogen.
It is also very effective for vehicles where cut lines are difficult to read or the brightness does not increase!
*The above images are compared when the halogen bulb is installed, the optical axis is aligned, and the bulb is replaced with an LED bulb. (Compared without adjusting the optical axis when replacing LEDs)
Normally, when replacing a bulb, there will be some misalignment, so optical axis adjustment is required each time.
Available in easy-to-see 6000K (white light) and 2800K (yellow light)!
To make it easier for drivers to see, it illuminates areas that halogen lights cannot illuminate, greatly improving visibility! Approximately 2.5 times brighter (H4 low beam)
Single bulb 6000 lumens *Value for 2 bulbs per unit.
H4 (Hi/Lo) 5800/5000 lumens *Value for 2 bulbs per vehicle.
Available in two colors: 6000K (white light) for excellent brightness and visibility, and 2800K (yellow light) for excellent visibility in bad weather such as rain, snow, and fog. *2800K does not have an H4 setting.
[Caution] The RGH-P972 (yellow light) is a model that can also be used as a head and fog light, but please note that the installation of this product in the headlights is no longer subject to the safety standards for vehicles manufactured after January 2006. *Fog lights are still subject to the safety standards (vehicle inspection) for vehicles manufactured after this year.
Ultra-compact design with the same shape as halogen bulbs/ Full lineups of bulbs.
Developed with the target of being the same size as a halogen bulb. Integrated structure with built-in driver unit.
We offer a lineup of highly versatile bulbs that can be used as both head bulbs and fog bulbs.
All items in the series are compatible with 12V/24V. P971/P972 is a single item that can accommodate H8, 9, 11, 16/HB3, 4/HIR2 by replacing the included flanges and cables.
*The H4 type has a midsection of 26.5 mm or less, and is designed to be compatible with vehicles such as the Daihatsu Mira e:S, which cannot fit if the size is too thick.
For application, please refer to the application table by vehicle type.
Maintain brightness with high heat dissipation mechanism
Strongest cooling mechanism: Copper heat pipe + copper board + built-in silent fan
Equipped with a copper heat pipe and copper base with excellent heat transfer, it efficiently transfers heat from the light-emitting section to the built-in fan section, achieving an ideal luminous flux maintenance rate without overheating.
●Emphasis on heat dissipation, which is the weak point of small valves.
●The heat from the light emitting part is immediately transferred to the rear fan part.
●The rear fan layout boasts maximum cooling efficiency to suppress optical phenomena caused by overheating.
Brightness (luminous flux) maintenance rate: 90% or more
Suppresses the drop in brightness due to overheat during the initial lighting and stable period.
The brightness of the initial lighting (100%) is maintained at 90% or more even when stable.
A high brightness (luminous flux) maintenance rate is an important element that minimizes the burden on electronic components and is directly linked to long life and high durability, and Compact Star HF was designed with long-term brightness in mind, and so we have only selected reliable parts.
Built-in high beam indicator canceller (H4 type)
For some vehicles made by Toyota, Mazda, Daihatsu, Hino, and others, the indicator lamp may not light up if it is replaced with an LED. The Premium Model 2 (H4 type) has a built-in canceller function, so no separate option is required.
Easy to install! You can work as if you were replacing a halogen bulb!
H4 and other single types are almost the same size as halogen bulbs, so they can be installed with a plug-in.
Since it is polarity free, there is no need for voltage detection.
The single type is slightly larger in rear size than halogen bulbs, so please refer to the vehicle application table.
How to replace H4
Single (H11) replacement method example
*When installing on HB3/4 and HIR2, please use the included flange and dedicated conversion connector together.
Single valve includes conversion flange
The RGH-P971/RGH-P972 single bulb comes standard with an H11 type (compatible with H8/9/11/16) flange. Also included in the product is the conversion cable, connector and HB type flange. By swapping these parts, it can be installed on HB3/4 HIR2 types.
Equipped with valve rotation mechanism (single valve)
The single bulb of RGH-P971/RGH-P972 is equipped with a bulb angle rotation adjustment mechanism. By loosening the set screw with the included L-shaped wrench, you can adjust the optimal light distribution angle for the head or fog lamp.
Product lineup
RGH-P973 H4 6000K
RGH-P971 H8/9/11/16 HB3/4 HIR2 6000K
RGH-P972 H8/9/11/16 HB3/4 HIR2 2800K
RGH-P971/P972 component parts
2 LED bulbs / 2 HB conversion flanges / HB conversion cable / HB3 O-ring / Aluminum spacer / L-wrench
[Product number/specifications]
*The product contains 2 valves. *Brightness is the value for a total of 2 lights on the left and right sides.
*Power consumption is for one light on each side. *All Premium Model 2 models are 12/24V compatible models. 3-year warranty (2-year warranty for commercial vehicles).
*Case size: H110.5 x W105.5 x D60mm
| Product number | Shape | Color | Brightness | Rating | List price (tax included) | JAN code 49963271 |
|---|---|---|---|---|---|---|
| RGH-P971 | H8/9/11/16 HB3/4 HIR2 compatible | 6000K white light | 6000lm | 12/24V 30W | 15,180 yen | 10293 |
| RGH-P972 | 2800K yellow light | 10309 | ||||
| RGH-P973 | H4 | 6000K white light | Hi5800/ Lo5000lm | 12/24V Hi30/ Lo28W | 18,480 yen | 10316 |