POWER LED STOP&TAIL BULB
Deeper and richer red light than genuine bulb.
The LEDs instantaneous lighting performance enhances the signal to the rear!
Red light that achieves ideal brightness and light distribution.
Available in T20 double bulb and S25 double bulb. Warning light cancel resistor also available separately.
- Compatible with vehicle inspection
- Stop & Tail Only
- Red light
(Red light) - 360° Irradiation
- 12V only
- With polarity
- HV/EV compatible
- T20 double ball
- S25 double bulb
※BAY15d
P615 T20 double element
Equipped with 18 high-brightness red LEDs. 3-way LED layout for 360° illumination.
For 12V vehicles only.
There is polarity. Be sure to check the applicable polarity.
Contains 2 pieces.
Irradiation image
It emits a deeper, richer red light that blends in with the red color of the lens better than a normal bulb.
Valve Size
T20 double wedge type.
Same size as normal bulb.
Usable in many places
This is a valve exclusively for stop and tail with T20 double bulbs.
The polarity varies depending on the vehicle, and even if the shape is the same, the light may not turn on properly. Please check the polarity and application in advance.
*Some vehicles require the use of the separately sold P613 (resistance unit).
P616 S25 double element
Equipped with 18 high-brightness red LEDs. 3-way LED layout for 360° illumination.
For 12V vehicles only.
There is polarity. Be sure to check the applicable polarity.
Contains 2 pieces.
Irradiation image
It emits a deeper, richer red light that blends in with the red color of the lens better than a normal bulb.
Valve Size
S25 double pin type.
BAY15d socket shape.
Same size as normal bulb.
Usable in many places
This is a valve exclusively for stop and tail with S25 double bulb (BAY15d).
The polarity varies depending on the vehicle, and even if the shape is the same, the light may not turn on properly. Please check the polarity and application in advance.
*Some vehicles require the use of the separately sold P613 (resistance unit).
P613 Resistor Unit
A metal clad resistor that cancels the warning light when the stop and tail light bulb is replaced with an LED.
For 12V vehicles only.
Contains 2 pieces.
*Includes an electrotap, aluminum tape for fixing, and zip ties.
*Please refer to the vehicle type application table for required vehicles.
Resistor Size
Installation Method
If you are installing a P615/P616 stop and tail bulb, please use the P613 resistor unit together to cancel the warning light if necessary.
Please connect the resistor unit securely across the positive wire that turns on the small light and the common negative wire. Please use one resistor per bulb.
*The resistor will become very hot during use, so do not install it on the lamp body or plastic parts.
[Caution] Check polarity when installing stop and tail
P615 and P616 have polarity.
Please be sure to check the polarity of the vehicle beforehand. (Applicability to all vehicles has not been confirmed.)
The P615 T20 double bulb only applies to vehicle side polarity "+-+-" or "-+-+".
*"++--" and "--++" are not applicable.
P616 S25 double bulbs only apply bottom polarity "+" and side polarity "-".
Any polarity other than the above will not light up properly.
Inapplicable vehicle types (some)
Product lineup
[Product number/specifications]
*The product comes in a pack of 2. *The power consumption is for one light.
| Product number | Shape | Color | Rating | List price (tax included) | JAN code 49963270 |
|---|---|---|---|---|---|
| RGH-P615 | T20 Double | Deep Red | For 12V 1.62W | 3,036 yen | 93596 |
| RGH-P616 | S25 Double | 3,036 yen | 93602 | ||
| RGH-P613 | resistance unit | – | 89 ohms At 12V | 2,970 yen | 89179 |