SR HID genuine replacement valve (for repair)
The world's No.1 lighting manufacturer
The SR Lighting Series offers the highest quality from Philips!
The manufacturer is Philips, the world's No. 1 manufacturer of genuine automotive lamps.
This is our original product, "SR Lighting Series Replacement HID Bulb."
- Compatible with vehicle inspection
- Repair parts
- Philips
- Genuine adoption level
- High durability
- High precision
- Wide range of products
Officially certified by Philips
SR repair valves, which use technology at the same level as genuine parts, are of the highest level of repair quality.
Furthermore, the technology used in OEM products can also be immediately applied to SR repair valves. We continue to pursue cutting-edge quality.
Uses UV-blocking quartz glass
Compared to general hard glass, it is strong and has a very small thermal conductivity and thermal expansion rate, so it boasts high durability. In addition, it is coated with a coating that blocks harmful ultraviolet rays emitted from the bulb, protecting the headlamp from deterioration (whitening).
No.1 manufacturer of automotive HID bulbs in the world
Philips developed the first HID bulb for automobiles in 1990. Since then, the company has continued to lead the market by developing mercury-free HID bulbs and new standard products. Philips' HID bulbs, which boast high technical capabilities, are used as original equipment by most car manufacturers both in Japan and overseas, and the company is the world's largest manufacturer of HID bulbs. Philips HID bulbs, created using advanced manufacturing technology, are highly regarded around the world for their precise light distribution and high quality.
Product features exclusive to SR HID genuine replacement bulbs D4S/D4R/D3S
Special processing has been applied to reduce heat generation and improve initial discharge performance.
① A vacuum is created between the inner and outer glass and a special cooling gas is injected.
②The primary side is covered with a highly conductive platinum film (platinum), which significantly improves initial lighting performance.
Brightness and lifespan of SR genuine replacement HID bulbs
The color temperature of SR HID bulbs and genuine parts is approximately 4300K (Kelvin).
*The brightness indicated is for S (projector type). R (reflector type) is slightly lower than the indicated brightness.
*Lifespan is indicated according to the TC standard of the JIS standard. (D1S/D3S is according to the TC standard of the ECE standard.)
| specification | Color temperature | SR genuine replacement HID bulb | Genuine HID bulbs | ||
| Brightness (lumens) | Lifespan (hours) | Brightness (lumens) | Lifespan (hours) | ||
| D2S/R | 4300K | 3,400lm | 3,000h | 3,200lm | 2,000h |
| D4S/R | 4300K | 3,200lm | 2,500h | 3,000lm | 2,000h |
| D1S | 4300K | 3,350lm | 3,000h | 3,200lm | 2,000h |
| D3S | 4300K | 3,200lm | 2,500h | 3,000lm | 2,000h |
HID bulb (D2/D4) types and compatibility
There are two types of HID bulbs: "S" and "R".
Depending on the shape of the car's lighting fixture, the setting is "S" for projector type and "R" for reflector type.
Also, please note that the installation shapes and conditions differ depending on the D2 and D4 series, so please be careful when purchasing.
D1S/D3S shape and compatibility
D1S/D3S are different valves with different shapes and valve specifications. Please note that the shapes are similar.
*There are also reflector type varieties called D1R/D3R, but they are not specified.
*D3S does not use any mercury in the valve's filling compound.
HID is a consumable item. Regular replacement is necessary to ensure good night vision!
An HID bulb does not reach the end of its life when it burns out; it reaches the end of its life when the light output falls to 70% of its original value from when it was new.
*The brightness of HID bulbs decreases over time and they become dimmer without you noticing.
Comparison of vehicle illumination when new and after 3-4 years of use
Reduction in light intensity due to lighting (illumination comparison)
After 3 to 4 years of use, the brightness of the original HID bulb will decrease.
It will be significantly darker.
The bulb that has been on for 1,500 hours (illumination photo on the right) is in a new condition.
The brightness is reduced by about 40%.
The color also changes from white to a slightly purple hue.
Visibility is also greatly reduced.
Light-emitting part in the center of the bulb (blackened)
Correlation graph between HID lighting time and brightness
After the bulb is left on for a long time, it will become cloudy and black.
When the exterior looks like the photo on the right, the amount of light is greatly reduced.
The valve is close to breaking.
SR genuine replacement HID bulbs are high-performance replacement bulbs that have a brightness lifespan (luminous flux maintenance rate) that is 10% better than genuine HID bulbs.
* Prevents the light-emitting part from turning black or cloudy when used, and slows down the attenuation of brightness.
Product lineup
[Product number/specifications]
| Product number | type | Rating | correspondence | List price | JAN code 49963270 | remarks |
|---|---|---|---|---|---|---|
| SR-RB01 | D2S | 85V35W | Compatible with 12/24V | OPEN | 60840 | Packing unit: 1 piece 10 parent boxes |
| SR-RB02 | D2R | 85V35W | Compatible with 12/24V | 60857 | ||
| SR-RB03 | D4S | 42V35W | 12V compatible | 60864 | ||
| SR-RB04 | D4R | 42V35W | 12V compatible | 60871 | ||
| SR-RB05 | D1S | 85V35W | 12V compatible | 78869 | ||
| SR-RB06 | D3S | 42V35W | 12V compatible | 78876 |